Manufactured by Bohler Bleche, this cold rolled cutting plate has a hardness of approximately 33HRC +/- 2. Whilst this is our softest plate material, it is typically twice as hard as commonly used soft plates, normally found in the carton production area as thin plates. Therefore, A500 provides a longer lasting cutting surface resisting marking and cutting marks, making it ideal for long production runs.
A500 Grade:
| Standards (DIN/AISI) |
Hardness |
Application |
| DIN 1,4301; AISI 304 |
500 - 700 Nmm² |
Protection plates |
Typical Analysis:
C: 0.05; Cr: 18.5; Ni: 9.5
Tolerances:
Lasercut for excellent tolerances:
| Width (mm) |
Thickness (mm) |
Parallelism (mm) |
Flatness (mm) |
| - 0 / + 0.4 |
+ / - 0.1 |
Max 0.04 |
0.5 |
